Like most people, you rely on your chainsaw to help with yard work and other outdoor projects. If your chainsaw isn’t cutting right, it’s not just you. It’s a common problem that a lot of people experience.
But don’t worry, we’re here to help. This blog post will discuss the causes of a chainsaw that won’t cut and how to fix it. We’ll also provide some tips on how to prevent the problem from happening again in the future. So if your chainsaw is giving you trouble, read on!
Why Is My Chainsaw Smoking But Not Cutting?
It’s a frustrating feeling. You pull your chainsaw out to take down a dead tree in your yard, only to find that it’s smoking profusely but not cutting through the wood. What gives?
There are a few potential reasons your chainsaw is smoking but not cutting.
Dirty Bar And Chain
One possibility is that the saw has accumulated too much sawdust and debris in the bar and chain. This can happen over time, especially if you don’t regularly clean and lubricate your saw. The solution is to use a wire brush or small screwdriver to clean the bar and chain, then apply fresh lubricant.
Dull Chain
Another potential reason is that the chain itself is dull. A dull chain will cause more friction as it cuts, which can create heat and cause the saw to smoke. If your chain is dull, you’ll need to sharpen it using a chainsaw sharpener.
Bad Fuel
Bad gas can also wreak havoc on your chainsaw and cause it to smoke. If you’re using gas that’s more than 30 days old, dump it out and start fresh. Old gas can gum up the carburetor and prevent the engine from starting properly.
Damaged Spark Plug
A damaged spark plug can also cause your chainsaw to smoke. If the spark plug is fouled or damaged, it won’t fire properly, and the engine won’t run as efficiently. You’ll need to replace the spark plug if this is the case.
Insufficient Bar Oil
Check your bar oil before you start cutting. If it’s low, add more until it reaches the fill line. If the bar oil reservoir is empty, your chainsaw won’t be properly lubricated and will overheat quickly. This can cause all sorts of problems, including a smoking saw.
Faulty Engine
Finally, the problem may lie with the engine itself. If your chainsaw is smoking and making strange noises, the piston rings or cylinder walls may be damaged. This is a serious issue that will require professional repairs. However, if you take care of your chainsaw and keep it properly maintained, you should be able to avoid this type of problem.
How to Prevent Your Chainsaw from Not Cutting
Chainsaws are essential for anyone who needs to cut through wood regularly. However, if the chain is not properly maintained, it can quickly become dull, making it difficult to cut through even the softest of woods.
Here are a few ways to help you keep your chainsaw in top condition:
Fortunately, there are a few simple steps that you can take to ensure that your chainsaw always cuts cleanly. First, be sure to sharpen the chain regularly. A sharp chain will not only make cutting easier, but it will also help prolong the saw’s life.
Second, keep the chain clean and well-oiled. A dirty or dry chain can cause the saw to bind and can damage both the saw and the wood.
Finally, use the correct type of oil in the saw. Using a high-quality oil will help to keep the chain running smoothly and will further extend its life.
By following these simple tips, you can keep your chainsaw in top condition and ensure it will always be cut cleanly. So don’t wait until your saw is smoking to take action. Be proactive and take care of it today!
More Tips On Keeping Your Chainsaw In Tip Top Shape
If you want to avoid having a chainsaw that doesn’t cut, it’s essential to take proper care of it. Here are some additional tips:
- Inspect the spark plug regularly. If it’s fouled or damaged, it won’t fire properly, and the engine won’t run as efficiently.
- Keep the air filter clean. A dirty air filter can restrict airflow and cause the engine to overheat.
- Be sure to change the oil regularly. This will help to keep the chain running smoothly and extend its life.
- Be sure to have the saw regularly serviced by a professional. This will help to identify any potential problems before they become serious.
Smoking chainsaw: Conclusion
While it may be frustrating when your chainsaw isn’t working properly, thankfully, there are a few things you can do to fix the issue. By troubleshooting the problem and following the steps above, you’ll have your chainsaw running like new.
Related Article: Chains Keep Coming Off Chainsaw